Parallel Bars is suitable for gait training with the help of upper limbs to enhance walking stability, and can also correct foot valgus and hip abduction during walking.
- Item No.:
YB-102-2
- Series:
Gait Training Series
- Usage:
Construction
Data sheet
Size:
✳Lever diameter ￠38mm, thickness 1mm; lined with seamless steel pipe, size ￠36×1.6mm; lever length 300cm
✳The size of the 2 fixed plates is 1000×460×6mm
Material:
Craftsmanship & color:
Load:
The static load of the lever is not less than 135kg.
Instructions For Use
✳The parallel bars can be adjusted appropriately according to the needs of the trainer.
✳The trainer, with the help of a rehabilitation therapist or nursing staff, supports the lever with both hands for gait training.
✳Hold the parallel bar in your hands, land on the ground with your healthy feet, and swing the affected part back and forth, left and right, to perform training to maintain or increase the range of motion of the joints of the lower limbs.
Other Information
1. Performance of parallel bars
✳The parallel bars comply with the settings in the basic parameter table, and should be flexibly adjusted and locked reliably within any position within this range.
✳Parallel bar stability: Smooth landing without shaking.
2. Installation and debugging of parallel bars
✳Before unpacking the parallel bar, please check whether the packaging box is intact and check whether the items are complete according to the packing list.
✳Parallel bars should be placed on a stable ground. Have appropriate space for activities.
✳Install the parallel bars and accessories according to the diagram, and tighten each fastener.
3. Precautions
✳Before using parallel bars, you should read the product instruction manual in detail, familiarize yourself with the product’s performance, requirements and operating methods. Check the product for no-load operation. It can be used only after it is verified to be in normal condition.
✳Must be trained in an orderly manner with the help of a rehabilitation therapist or nursing staff. Follow the “step-by-step” principle and gradually increase exercise intensity and training time according to the specific conditions of the trainer.
✳If the parallel bar fails, please contact the manufacturer in time and send someone to repair it. Do not dismantle or repair it at will.
4. Maintenance and maintenance of parallel bars
✳All parts of the parallel bars should be kept clean and lightly wiped with a clean soft cloth regularly.
✳If the parts are damaged, please contact the manufacturer in time for repair.
5. Packaging, transportation and storage
✳The product is packed in wooden boxes.
✳The product can be transported by ordinary means of transportation. It should be handled with care during transportation. It should not be subject to heavy pressure or collision. It should be protected from the sun and rain, and it is forbidden to mix with pollutants.
✳The product should be stored in a dry, ventilated room without corrosive substances. Do not subject to heavy pressure or impact.