Used for standing training for patients with standing dysfunction such as cerebral palsy and hemiplegia.
- Item No.:
- Series:
- Usage:
- Remark：
Construction
2. Countertop
3. Hip Pad
4. Leg Pad
5. Straps
6.Footrest
7.Casters
Data sheet
Size:
930×660×（830～1100）mm
Weight:
25kg
Front And Rear Wheel Diameter:
80 mm (3 in) solid wheel with brake
Adjustment Range:
✳Table panel rotation angle: 0～45°,
✳Knee support front and rear telescopic range: 0～400mm,
✳Abdomen pad and chest pad left and right adjustment range: 200～400mm,
✳Standing frame equipped with tilt adjustment device, tilt angle: 0～45°
Material:
✳Electrostatic spray frame
✳Polyurethane foam sponge one-time molding
✳PU bed surface
Load:
70kg
Instructions For Use
✳The therapist and the nurse help the patient stand up, adjust the knee pad to the required height, and fix it with straps.
✳Adjust the table and backrest to make the patient feel more comfortable.
✳After the standing training is over, the therapist and the nurse loosen the backrest and straps and help the patient move out of the standing frame.
✳The standing training time is determined by the therapist and the nurse.
Other Information
1. Precautions
✳Before using the product, you should read the product manual in detail, familiarize yourself with the product’s performance, requirements and operating methods, and perform an unloaded operation inspection on the product. The seat can only be used after it is confirmed to be in good and normal condition.
✳Children should conduct sitting posture correction training under the guidance of a rehabilitation therapist and with the help of a nursing staff. The effect will be better if the child’s mother accompanies the child. Sitting posture correction training should follow the principle of “gradual progress” and gradually increase the training time.
✳When children are doing sitting posture correction training and sitting, some toys or other children’s rehabilitation equipment can be placed on the table, and the nursing staff or the child’s mother can practice with the child. Language training suitable for the child’s intelligence can also be carried out.
✳The control of training time should take into account the time pattern of children’s urination and defecation.
✳During training, it is not advisable to push and pull the seat quickly to avoid scaring the child.
2. Maintenance and care
✳All parts of the sitting posture correction chair should be kept clean and wiped lightly with a clean soft cloth regularly.
✳If the parts are damaged, please contact the manufacturer in time for repair.
3. Packaging, transportation and storage
✳The product is packed in wooden boxes.
✳The product can be transported by ordinary means of transportation. It should be handled with care during transportation. It should not be subjected to heavy pressure or collision. It should be protected from the sun and rain. It is forbidden to mix it with pollutants.
✳The product should be stored in a dry, ventilated room without corrosive substances. It should not be subjected to heavy pressure or collision.