This product is suitable for work training on upper limb muscle coordination and joint mobility.
- Item No.:
YB-514
- Series:
Occupational Therapy Series
- Usage:
Suitable for occupational training to improve upper limb muscle strength, coordination and joint mobility.
Construction
1. Bracket
2. Sanded Board Countertop
3. Accessories For Training
4. Angle Adjuster
Data sheet
Size:
100×80×84-132cm
Weight:
60kg
Area:
93.5×72.5cm
Thickness:
≥0.5cm
Adjustment range
0～50°
Material:
✳Wood
✳PVC sanded board
✳Electrostatic spray frame
✳PVC sanded board
✳Electrostatic spray frame
Type And Number Of Accessories:
4 varieties, 1 piece each
Instructions For Use
✳The angle of the sanding board can be adjusted appropriately according to the needs of the trainer.
✳The trainer can sit on a chair or stand in front of a table and rub the tabletop with the training model attachment.
✳There are 4 models to choose from for targeted training with different grip positions.
Other Information
1. Performance of adjustable sanding plate and accessories
✳Sanding plate angle adjustment range: in line with the settings in the basic parameter table, and the adjustment should be flexible and reliably locked at any position within this range
✳Sanding plate thickness and area: in line with the settings in the basic parameter table: the sanding surface is firmly embedded.
✳Adjustable bolts: can be flexibly adjusted.
2. Installation and commissioning of adjustable sanding plate and accessories
✳Before unpacking the sanding plate, please check whether the packaging box is intact and check whether the items are complete according to the packing list.
✳The sanding plate should be placed on a stable ground. There is appropriate space for activities.
✳Install the sanding plate bracket according to the diagram and tighten the fasteners.
✳Install the angle adjustment limiter assembly on the angle adjustment base rod of the main frame.
✳Place the sanding plate table on the three-dimensional frame and connect and tighten it with the angle adjustment limiter according to the corresponding screw holes.
✳After the product is installed, adjust the adjustable bolts at the bottom of the bracket to make the base frame stable and without shaking.
✳The installation steps for the adult type are the same as those for the child type.
3. Precautions
✳Before using the sanding board, you should read the product manual in detail, familiarize yourself with the product’s performance, requirements and operating methods, and perform a no-load operation inspection on the product. It can only be used after verification that it is in normal condition.
✳Orderly training must be carried out with the help of a rehabilitation therapist or nursing staff. Follow the principle of “gradual progress” and gradually increase the intensity of exercise and training time according to the specific situation of the trainee.
✳It is strictly forbidden to use accessories or other sharp tools to knock on the sanding board table to prevent injury to people and damage to the product.
✳If the sanding board fails, please contact the manufacturer in time and send someone to repair it. Do not dismantle it at will.
4. Maintenance and care of adjustable sanding boards and accessories
✳All parts of the sanding board should be kept clean and wiped lightly with a clean soft cloth regularly.
✳If the parts are damaged, please contact the manufacturer in time for repair.
5. Packaging, transportation and storage
✳The product is packed in wooden boxes.
✳The product can be transported by ordinary means of transportation. It should be handled with care during transportation. It should not be subjected to heavy pressure or collision. It should be protected from the sun and rain. It is forbidden to mix it with pollutants.
✳The product should be stored in a dry, ventilated room without corrosive substances. It should not be subjected to heavy pressure or collision.
✳Sanding plate angle adjustment range: in line with the settings in the basic parameter table, and the adjustment should be flexible and reliably locked at any position within this range
✳Sanding plate thickness and area: in line with the settings in the basic parameter table: the sanding surface is firmly embedded.
✳Adjustable bolts: can be flexibly adjusted.
2. Installation and commissioning of adjustable sanding plate and accessories
✳Before unpacking the sanding plate, please check whether the packaging box is intact and check whether the items are complete according to the packing list.
✳The sanding plate should be placed on a stable ground. There is appropriate space for activities.
✳Install the sanding plate bracket according to the diagram and tighten the fasteners.
✳Install the angle adjustment limiter assembly on the angle adjustment base rod of the main frame.
✳Place the sanding plate table on the three-dimensional frame and connect and tighten it with the angle adjustment limiter according to the corresponding screw holes.
✳After the product is installed, adjust the adjustable bolts at the bottom of the bracket to make the base frame stable and without shaking.
✳The installation steps for the adult type are the same as those for the child type.
3. Precautions
✳Before using the sanding board, you should read the product manual in detail, familiarize yourself with the product’s performance, requirements and operating methods, and perform a no-load operation inspection on the product. It can only be used after verification that it is in normal condition.
✳Orderly training must be carried out with the help of a rehabilitation therapist or nursing staff. Follow the principle of “gradual progress” and gradually increase the intensity of exercise and training time according to the specific situation of the trainee.
✳It is strictly forbidden to use accessories or other sharp tools to knock on the sanding board table to prevent injury to people and damage to the product.
✳If the sanding board fails, please contact the manufacturer in time and send someone to repair it. Do not dismantle it at will.
4. Maintenance and care of adjustable sanding boards and accessories
✳All parts of the sanding board should be kept clean and wiped lightly with a clean soft cloth regularly.
✳If the parts are damaged, please contact the manufacturer in time for repair.
5. Packaging, transportation and storage
✳The product is packed in wooden boxes.
✳The product can be transported by ordinary means of transportation. It should be handled with care during transportation. It should not be subjected to heavy pressure or collision. It should be protected from the sun and rain. It is forbidden to mix it with pollutants.
✳The product should be stored in a dry, ventilated room without corrosive substances. It should not be subjected to heavy pressure or collision.