Rib Bars

This product is suitable for upper and lower limb joint range of motion and muscle strength training, sitting and standing training, balance training and trunk stretching training.

YB-411-2
Full Body Exercise Series
It is suitable for upper and lower limb joint range of motion and muscle strength training, sit-stand training, balance training and trunk stretching training.

Construction

1. Fixed Bracket
2. Rib Wood Bracket
3. Rib Wooden Bar
4. Movable Frame

Rib Bars Construction

Data sheet

Size:

100×50×200cm

Rib Diameter:

3.2cm

Rib Spacing:

11cm

Material:
✳Steel
✳Plastic spraying on steel surface
Load:

135kg

Instructions For Use

✳Under the guidance of a rehabilitation physician or professional nursing staff, carry out training appropriate to the patient’s needs.

Other Information

1. Performance of ribs
✳Adults use YB-411-2 ribs, and the maximum load of each rib bar does not exceed 135 kg.
✳The diameter and spacing of the rib bars meet the requirements of the basic parameter table.

2. Installation and commissioning of ribs
✳The product is easy to install and can be installed according to the finished product drawing.
✳Before unpacking the ribs, please check whether the packaging box is intact and check whether the items are complete according to the packing list.
✳The base of the rib should be on the ground, and the end 1 fixed bracket should be fixed to the wall with expansion bolts or installed on the metal structure with bolts.
✳The wall should be selected as a solid load-bearing wall, and no lines, pipelines or other facilities are allowed in the wall.
✳The whole is firmly assembled with M8×100 expansion bolts from top to bottom. The drilling depth shall not be less than 80mm.
✳After the ribs are fixed on the wall, the ground or the metal structure, they should be tested under the corresponding maximum load, and then check whether the expansion bolts are loose or pulled out, and they shall not be shaken or damaged.

3. Precautions
✳Before using the rib bar, you should read the product manual in detail, familiarize yourself with the product’s performance, requirements and operation methods, and confirm that the installation is firm before training.
✳Must conduct orderly training with the help of a rehabilitation therapist or nursing staff. Follow the pre-set training plan step by step, and gradually increase the training intensity or time according to the specific situation of the trainee.
✳During use, it is strictly forbidden to exercise vigorously or sway.
✳If the rib bar fails, please contact the manufacturer in time and send someone to repair it. Do not dismantle it at will.

4. Maintenance and care of rib bars
✳All parts of the rib bar should be kept clean and wiped lightly with a clean soft cloth regularly.
✳If the parts are damaged, please contact the manufacturer in time for repair.

5. Packaging, transportation and storage
✳The product is packed in wooden boxes and the inner wall is covered with moisture-proof linoleum.
✳The product can be transported by ordinary means of transportation. It should be handled and placed with care during transportation. It should be protected from sun and rain, and it is forbidden to mix it with pollutants.
✳The product should be stored in a dry, ventilated room without corrosive substances.