By continuously moving your fingers up the stairs, you can gradually increase the range of motion of the shoulder joint, reduce pain, and improve the mobility of the shoulder joint caused by various reasons.
- Item No.:
- Series:
- Usage:
- Remark：
Construction
1. Shoulder Ladder
2. Lift Adjustment Knob
3. Fixed Jacket
Data sheet
Size:
10×17×127cm
Shoulder Ladder Lifting Range:
0～26cm
Weight:
8kg
Material:
✳Electrostatic spraying rack
Load:
Vertical rated load: 10kg
Instructions For Use
✳ Carry out relevant training under the guidance of a rehabilitation therapist.
✳ Use your fingers to move up and down along the shoulder ladder to gradually increase the range of motion of the shoulder joint.
✳ During training, your eyes move in the direction of your hands to promote the movement of your hand muscles and cervical spine.
✳ The shoulder ladder can be practiced alternately with your left and right hands to gradually improve the flexibility and coordination of the active movement of the finger system.
Other Information
1. Performance of the shoulder ladder
✳The lifting and lowering adjustment of the shoulder ladder is light and flexible, and the lifting range complies with the provisions of Table 1, and it can be reliably locked at any position within this range.
✳The vertical load of the shoulder ladder complies with the provisions of Table 1.
2. Installation and debugging of the shoulder ladder
✳The product is easy to install and can be installed according to the finished product drawing.
✳Before unpacking the shoulder ladder, please check whether the packaging box is intact and check whether the items are complete according to the packing list.
✳The shoulder ladder should be fixed to the wall or metal structure with expansion bolts or installed on the metal structure with bolts.
✳The wall surface should be selected as a solid load-bearing wall, and no lines, pipelines and other facilities are allowed in the wall.
✳After the shoulder ladder is fixed to the wall or metal structure, it should be tested under the corresponding maximum load to check whether the expansion bolts are loose or pulled out, and it must not be shaken or damaged.
3. Precautions
✳Before using the shoulder ladder, you should read the product manual in detail and be familiar with the performance, requirements and operation methods of the product; make sure that the shoulder ladder is firmly installed before training.
✳The training should be carried out in an orderly manner with the help of a rehabilitation therapist or nursing staff. The principle of “gradual progress” should be followed, and the training time should be gradually increased according to the specific situation of the trainee.
✳During use, it is strictly forbidden to shake the equipment violently.
4. Maintenance and care
✳All parts of the shoulder ladder should be kept clean and wiped lightly with a clean soft cloth regularly.
✳If the shoulder ladder fails, you should contact the company in time for repair and not dismantle it at will.
5. Packaging, transportation and storage
✳The product is packed in cartons
✳The product can be transported by general means of transportation. It should be handled and placed gently during transportation. It should be prevented from being exposed to the sun and rain, and it is forbidden to mix it with pollutants.
✳The product should be stored in a dry, ventilated room without corrosive substances. It must not be subjected to heavy pressure or collision.